2016 ShoreLand'r 17

On Sale
Was $2,499.00

In Stock
Fish & Hunt Shop
Primary Color


Dealer Insights

2016 Shoreland'r Bunk Trailer 16-17" No miles.


  • Style: Bunk
  • Carrying Capacity: 2200 lb.
  • Hull Length: 216 inches
  • Transom to Bow Eye: 201 inches
  • Chrome Graphics: Our stylish chrome design match your boat's trim.
  • Fully adjustable winch post
  • Fully Carpeted Bunks
  • Patented Roller Design: The ShoreLand'r roller has a glass-filled, thermoplastic hub for strength and a bonded rubber surface. Its cat's-eye shaped axis gives the roller a larger bearing surface on which to rotate, and in turn is specially designed to limit lateral swivel for more control during loading.
  • Profile 2000 Winch: The sleek, patented design of our Profile 2000 Winch houses an extra wide bow stop and safety chain. It's advanced design allows full adjustability and is pre-stamped to accept the optional tongue jack.
  • Superior Running Gear: Easily moved to fine-tune tongue weight for proper towing characteristics.
  • Patented Equiload System: Our patented EquiLoad Support System evenly distributes the weight of your boat for smooth launching and loading. The teeter-totter style bracket pivots on the rear cross-member to insure that every square inch of bunk or roller is doing its share to support your boat-s hull.
  • Heavy Duty Steel Tube Frame: Our welded, steel tube frame is the strongest in the industry. It proveds less flex and optimum support to ensure longer trailer life.
  • Superior Quality Finish: Powder-Coated Paint Our powder coating system provides more uniform coverage and a more durable finish for your trailer. With the characteristics of an automotive finish, it has a deep luster, will not fade and resists chipping. Galvanized Protection For maximum durability all models are available in hot-dipped galvanized finish.
  • Custom Molded Fenders: The industry standard has been set by the patented, ShoreLand'r Custom Molded Fender. Every fender is molded from a composite material that will not rust and springs back after minor impact. The larger series' fenders have integrated step pads and are enclosed on the inside to protect the side of the boat.
  • Bolt-On Coupler: The coupler is bolted on for easy replacement if necessary.
  • Enclosed Plug-in Wiring: Quick connect plug allows for easy hookup to tow vehicle and plug-in frame sections make maintenance a snap.
  • Double Safety Chains: Added towing protection.
  • Removable Tongue: Permits storage in confined areas. Ask about our optional Swing Tongue.
  • Bow Eye Safety Chain: For added towing safety.
  • Bearing Protectors: Keep grease in and water out to prolong the life of the running gear.
  • Protective Pads: On all cross-members and axles to protect the keel if contact is made during loading.
  • Waterproof Side Marker Lights: Equipped with a separate ground wire to guard against failure.
  • Frame Grommets: To protect wiring and keep from making contact with frame.
  • Drop Axle: Drop axle gives trailer a lower profile for smoother towing and easier loading. The robot-welded spindles ensure perfect welds and precise axle alignment.
  • Dual Purpose Step Pad: This handy step pad adds cushion to the frame where it is most vulnerable during loading.
  • Transom Tie-Down Point: conveniently located for securing your transom tie-down straps
  • Submersible Taillights
  • Spare Tire Bracket: Optional
  • Spare Tire: Optional
  • Tongue Jack: Optional
  • NMMA Certified: The "NMMA Certified" decal is your guarantee that every ShoreLand'r is built to meet or exceed the National Marine Manufacturers Association safety and quality standards. Don't settle for less!
  • Minimum Hull Length: 192 in.
  • Maximum Hull Length: 216 in.
  • Maximum Transom to Bow Eye: 201 in.
  • Capacity: 2200 lb.
  • Ship Weight: 485 lb.
  • GVWR: 2960 lb.
  • GAWR: 2960 lb.
  • Tires: ST185/80R13-C
  • Wheel Style: Directional
  • Frame Size: 2 in.x3 in.x11 ga.
  • Frame Width: 80.5 in.
  • Overall Width: 99.5 in.
  • Rear Cross Member Adjustment: 8 in.
  • Max. Overall Length: 239 in.
  • Fender Style: 9 in. Injection Molded
  • Width Between Fenders: 84.5 in.
  • Tongue Tube Size: 3 in.x3 in.x11 ga.
  • Tongue Length: 60 in.
  • Coupler Size: 2 in. Class II
  • Axle Size or Style: 2 in.x3 in.x7 ga.
  • Hub Size: 1 3/8 in. X 1 1/16 in.
  • Bolt Pattern: 5 bolts on 4.5 in.
  • Bearing Protectors: Standard
  • Suspension Type: Leaf Spring
  • Spring Length: 21.75 (Hook)
  • Number of Leaves: 5
  • Bunk Dimensions: 2 in.x4 in.
  • Bunk Length: 114
  • Keel Protective Pads (# - size): 1 - 15 in.
  • Keel Protective Pads (# - size): 2 - 12 in.
  • Winch: DL1402A
  • Winch Line: 2 in. Nylon Strap
  • Brake Size / Style: 10 in. Disc (Optional)



Carrying Capacity
2200 lb.
Boat Length
216 in.
10 in. Disc (Optional)
Tire Size


Trailer Weight
485 lb.
Trailer Length
239 in.
99.5 in.
Value Your Trade in 30 Seconds